스마일맨 민석 안녕하세요~ 모든 지식이 집합되어 있는 지식창고 입니다. 여기서 모든 지식을 가져가세요~ ^^
주인장 연락처

카테고리

분류 전체보기 (759)
SmileMan's Diary (57)
알아야 산다! Tips! (359)
공짜로 받아가세요~ (129)
DownLoad Files (6)
Association (49)
Photo (158)
Total
Today
Yesterday
03-29 02:18


코리아 베이비페어 서포터즈

Revu 파워블로거

PressBlog 프로미어 블로거



체험 블로그 마케팅 서비스 OLPOST


달력

« » 2024.3
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31

최근에 올라온 글

최근에 달린 댓글




===========================================================================
  PENTAX K100D       Firmware  Updating to Version 1.02
===========================================================================

* Firmware is the software that runs inside digital cameras.

  Updatable models
    K100D digital SLR cameras running Firmware Ver. 1.00/1.01

  How to check version
      Turn the power on while pressing the MENU button.
      The Firmware version is displayed for about 5 seconds at the center
      of the LCD monitor.
      Perform the above operation without inserting the SD card containing
      Firmware in the camera.

* * * * * * * * * * * * * * * * [Caution] * * * * * * * * * * * * * * * * *

  You are recommended to use the AC adapter (optional) when updating Firmware.
  If you are using CR-V3 lithium batteries or AA batteries, make sure that batteries are fresh.
  If AA Ni-MH rechargeable battery is use, be sure to use fully charged battery.
  If the camera turns off during updating due to lack of battery power, the camera will become inoperable.

  If this happens, a charge will be made for
  repairs even if within the warranty period.

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

  Updating Procedure

  1. Provide a formated SD memory card for the update software (with at least 8MB of available memory space).
     The downloaded file is self-extracting.
     The following files are extracted.

            readme.txt   :  this document
            fwdc156b.bin :  Firmware

     Copy the above Firmware file [fwdc156b.bin] to the root directory in the SD card.
     If your computer does not have a card slot, you can copy the firmware
     update file by inserting the SD card into your camera and then connecting
     the camera directly to your computer.

  2. If the camera power is on, turn it off.

  3. Insert the update SD card (prepared in step 1) into the camera.

  4. Connect the AC adapter to the camera.
     If you are using a rechargeable battery, make sure that it is fully
     charged, and if you are using batteries that are not rechargeable,
     make sure that they are fresh batteries.

  5. Turn the camera power on while pressing the MENU button.

  6. "NOW LOADING" appears in the LCD monitor, and will change to the
     "PROGRAM UPDATE". At the bottom of the LCD monitor,

            CURRENT VERSION 1.00/1.01
            UPDATE  VERSION 1.02
     will be displayed.

  7. Press the four-way controller to select "YES" and press the "OK" button.

  8. "UPDATING" appears on the LCD monitor and updating starts.
     Please do not under any circumstances switch off the power before the
     update is completed.
     It will take approximately 90 seconds to complete update.

  9. When update is completed, the "COMPLETE" will be displayed at the left
     bottom of the LCD monitor, then turn the camera off.

 10. Remove the update SD card from the camera.

 11. To check the Firmware version in your camera, turn the camera on while
     pressing the MENU button.
     Check that the version displayed in the LCD monitor is 1.02.
     The camera automatically starts up after about 5 seconds.

  (Caution)
    When updating is finished, the update SD card still contains the Firmware file.
    If you want to use this card to take pictures, delete the Firmware file  first.


PENTAX Corporation


DownLoad File :
Posted by 스마일맨 민석
, |