안녕하세요.
13월의 월급인 연말정산 기간이지요? ㅎ
다들 열심히 연말정산 서식을 작성하고 계신가요?
연말정산을 신청하는
2009년 소득공제신고서 / 근로소득자공제신고서 서식 입니다.
필요하신 분 있으면 받아가세요~ ^^
13월의 월급 많이 받으세요~ ^^
많이 받으시면...
저도 좀 나눠주실꺼죠? ㅋ
그럼 즐거운 오늘도 즐거운 하루 되세요~ ^^
|
===========================================================================
PENTAX K100D Firmware Updating to Version 1.02
===========================================================================
* Firmware is the software that runs inside digital cameras.
Updatable models
K100D digital SLR cameras running Firmware Ver. 1.00/1.01
How to check version
Turn the power on while pressing the MENU button.
The Firmware version is displayed for about 5 seconds at the center
of the LCD monitor.
Perform the above operation without inserting the SD card containing
Firmware in the camera.
* * * * * * * * * * * * * * * * [Caution] * * * * * * * * * * * * * * * * *
You are recommended to use the AC adapter (optional) when updating Firmware.
If you are using CR-V3 lithium batteries or AA batteries, make sure that batteries are fresh.
If AA Ni-MH rechargeable battery is use, be sure to use fully charged battery.
If the camera turns off during updating due to lack of battery power, the camera will become inoperable.
If this happens, a charge will be made for
repairs even if within the warranty period.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Updating Procedure
1. Provide a formated SD memory card for the update software (with at least 8MB of available memory space).
The downloaded file is self-extracting.
The following files are extracted.
readme.txt : this document
fwdc156b.bin : Firmware
Copy the above Firmware file [fwdc156b.bin] to the root directory in the SD card.
If your computer does not have a card slot, you can copy the firmware
update file by inserting the SD card into your camera and then connecting
the camera directly to your computer.
2. If the camera power is on, turn it off.
3. Insert the update SD card (prepared in step 1) into the camera.
4. Connect the AC adapter to the camera.
If you are using a rechargeable battery, make sure that it is fully
charged, and if you are using batteries that are not rechargeable,
make sure that they are fresh batteries.
5. Turn the camera power on while pressing the MENU button.
6. "NOW LOADING" appears in the LCD monitor, and will change to the
"PROGRAM UPDATE". At the bottom of the LCD monitor,
CURRENT VERSION 1.00/1.01
UPDATE VERSION 1.02
will be displayed.
7. Press the four-way controller to select "YES" and press the "OK" button.
8. "UPDATING" appears on the LCD monitor and updating starts.
Please do not under any circumstances switch off the power before the
update is completed.
It will take approximately 90 seconds to complete update.
9. When update is completed, the "COMPLETE" will be displayed at the left
bottom of the LCD monitor, then turn the camera off.
10. Remove the update SD card from the camera.
11. To check the Firmware version in your camera, turn the camera on while
pressing the MENU button.
Check that the version displayed in the LCD monitor is 1.02.
The camera automatically starts up after about 5 seconds.
(Caution)
When updating is finished, the update SD card still contains the Firmware file.
If you want to use this card to take pictures, delete the Firmware file first.
PENTAX Corporation
DownLaod
No 1 : HncTT20.part1.rarNo 2 : HncTT20.part2.rar